You only need tools to attach the aluminium profile (ideally a cordless screwdriver / drill), as well as scissors to trim the cable duct (for example Löwe 3.606) and large wire cutters to cut the LED module and cover to length. Everything else can be clicked into place without any soldering, crimping, etc.

Currently, we offer the 20 profile (datasheet) for attachments and the P20 (datasheet) for plaster installation. Other profile shapes / dimensions will follow.

The LED modules are always identical for every outer profile.

The LED modules are currently available in 827, 830, 835 and 840 (830 = 3000K with CRI>80). CRI90 modules will follow.

The LED modules require 48V DC. Smarterion offers a suitable converter range with TRIAC or DALI / PUSH dimming.

The LED modules can be clicked into place. Simply remove the broken module from the profile and click the replacement module in.

The connector has a DIP switch that can be used to adjust the output to 7 W/m, 15 W/m or 23 W/m.

The connector accommodates wires of between 0.75mm² and 1.5mm². A 2-pin cable is required.

The module can be cut at 60mm intervals. To ensure there are no shadows, the integrated LED connector is designed to be infinitely adjustable, ensuring that every length and every connection are perfectly illuminated.

The cover is supplied as a roll and can be easily clicked into the profile as it unrolls (just like a Tipp-Ex or adhesive roller).

All straight line geometries are possible, such as a rectangle, U-shape and L-shape. Corners don’t need to be 90; they can be any angle. There is currently a flexible electric corner connector, with a T- and X-connector to follow.

The app allows you to conveniently plot lighting on a floor plan or photo and automatically works out which components are required. A Bosch laser can be linked to the app to make it easier to measure lengths. The required components can be automatically transmitted to a wholesale online shop, where they can instantly be ordered.

The app is available for both the Android and iOS operating systems (tablet or smartphone). To place an order with a wholesaler, you need to have a user account in their online shop.

The maximum length depends on the set power of the LED module (7W/m, 15W/m or 23W/m).

At 7W/m you can run 21m per feed (with 1m of cable with a cross-section of 1.5mm², without the luminous flux falling below 80% of the first module.

At 15W/m it is still 13m and at 23W/m you can do 9m. You can find a table with different cable lengths here.

There are three control variants for RGB and TW LED modules.

1. DALI Controller 1100081 together with an on/off power supply unit
2. DALI Bluetooth Controller 1100079 together with a wireless remote control 1100080 and an on/off power supply unit
3. DALI Bluetooth Controller via Tuya app (smartphone) and an on/off power supply unit

Casambi would also be possible via DALI controller (connect Casambi module to DALI input)

luxKIT is a 48 VDC constant-voltage system.

In on/off mode, the devices produce virtually no noise.

When dimming via PWM (the only option with constant voltage), “whistling noises” may occur depending on the configuration and the device used. This is normal for this technology and affects all manufacturers, including those offering 24V or 12V solutions.

It is important to take this into account during project planning, e.g., by avoiding installation in bedrooms where people are highly sensitive to such noises.

Our 48V system offers the advantage of allowing for longer cable runs (less voltage drop), enabling devices to be installed in remote utility rooms, for example.

Every DALI controller can be used with CASAMBI: